Bentonville, Arkansas Remodeler Local Permit Ordinances and Codes
Bentonville, Arkansas Municipal Permit Ordinances for Remodelers and Home Renovations
1. Authority Having Jurisdiction
The Building & Fire Safety Division of the Bentonville Fire Department is the Authority Having Jurisdiction (AHJ) for building permits and inspections in Bentonville, Arkansas. They are responsible for ensuring that all construction and renovation projects comply with adopted building and fire codes.
2. Triggers for Demolition vs. Building Permits
A distinct demolition permit is generally required for the full demolition of any building or structure. For residential structures, this fee is $50, and for commercial structures, it is $100. Partial demolition that involves removing structural elements, such as walls, roof sections, or floors, also requires a building permit, and structural plans may be necessary to show how the remaining structure will be supported. However, removing small accessory structures built after 1978 and not located in a historic district may be exempt from a demolition permit, though utility disconnection and proper disposal are still required.
A standard residential building permit is required for most construction projects, including new construction, additions, and interior remodels of single-family homes. Remodeling work that involves more than cosmetic changes like painting or wallpapering also requires a permit. Similarly, building repair work, such as rebuilding a roof after structural damage, necessitates a permit.
3. Space Alterations and Conversion of Non-Living Spaces
Converting non-living spaces like basements or garages into habitable areas requires building, electrical, and plumbing permits. These conversions must meet all residential building code requirements for habitable space, including egress, insulation, ceiling height, and ventilation. The city's zoning code permits internal, attached, and detached accessory dwelling units (ADUs) by right in all districts, subject to specific standards.
4. Fee Nuances and Inspection Stages
Permit fees in Bentonville are calculated based on project valuation and type. The City of Bentonville uses the International Code Council Building Valuation Data Table to determine the valuation of a structure. For example, the demolition permit fee is $50 for residential and $100 for commercial structures. Penalties for starting work before obtaining a permit will double the specified fees.
The permit review process involves several stages: application submission, plan review for code compliance, corrections and resubmittal if necessary, and finally, permit issuance. Certificates of Occupancy are issued after construction is complete and the final inspection is passed by a City Building Official. Permits are generally valid for six months, with extensions possible upon written request.
Resources to Learn More
- Bentonville, AR Permit Applications
- Bentonville, AR Building Inspections
- Bentonville, AR Fees
- Bentonville, AR Ordinances
- Calculate a Bathroom Remodeling Project in Bentonville, Benton County, Arkansas
- Calculate a Kitchen Remodeling Project in Bentonville, Benton County, Arkansas
- Calculate a Basement Finishing Project in Bentonville, Benton County, Arkansas
- Calculate a Attic Conversion Project in Bentonville, Benton County, Arkansas
- Find Remodeler Contractors in Bentonville
- Find Remodeler Contractors in Benton County
- Find Remodeler Contractors in Arkansas
Because Bentonville is located within Benton County, the following broader county regulations may also apply to your project:
Arkansas, Benton County Remodeler Permit Regulations and County Ordinances for Unincorporated Areas
Benton County Building & Safety Division
The Benton County Building Safety Department is responsible for issuing building permits, conducting inspections, and ensuring code compliance for structures in unincorporated areas of the county. They enforce the 2021 Arkansas Fire Prevention Code, along with other relevant state codes. The department is staffed by permitting specialists and building inspectors.
Permit Requirements for Unincorporated Areas
Effective November 28, 2023, Benton County no longer requires building permits for detached "Group U" structures in unincorporated areas. This exemption includes structures such as shop buildings without living space, carports, storage buildings, decks, and fences. However, permits are still necessary for any structure that is attached to a residence or intended for commercial use. Additionally, permits are required for any new plumbing, electrical, or HVAC work, regardless of whether a building permit is needed for the structure itself. If a project does not require a building permit, residents must still contact the Planning Office to have their site plan reviewed.
Demolition Permit Triggers During Remodeling
Demolition work during a remodel may trigger the need for a permit. While specific local ordinances for Benton County regarding demolition permits during remodels are not detailed, general guidelines suggest that full building demolitions always require a permit. Partial demolitions involving the removal of structural elements, such as walls, roof sections, or floors, also necessitate a building permit. In such cases, structural plans may be required to demonstrate how the remaining structure will be supported. For structures built before 1978, an asbestos survey is typically required.
Permit Requirements for Converting Non-Living Spaces
Converting non-living spaces such as garages, attics, or unfinished basements into habitable living areas requires a building permit. Depending on the scope of the work, separate electrical, plumbing, or mechanical permits may also be necessary. It is recommended to consult with the Development Services Center (DSC) staff early in the planning process to discuss zoning and building code requirements. Existing conditions such as ceiling heights, windows, stairs, and insulation must meet current building code standards for habitable spaces. For garage conversions, ensuring adequate on-site parking may be a requirement.
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Arkansas:
Arkansas Remodeler Legislation, Codes, and Guidelines
Arkansas State Building Codes for Remodelers and Residential Renovations
Arkansas adopts state-level building codes primarily based on the International Codes (I-Codes) published by the International Code Council (ICC). The state's building codes are updated periodically to align with the latest national standards, with some state-specific amendments. Local jurisdictions are required to enforce these state-adopted codes, though they may implement more stringent provisions with state approval.
1. Specific State Statutes and Codes Adopted
- The current Residential Code of Arkansas adheres to the 2021 International Residential Code (IRC), which covers building, plumbing, mechanical, fuel gas, and electrical systems for one- and two-family dwellings and townhouses up to three stories high.
- The state also adopts the 2021 International Building Code (IBC) and the 2012 International Existing Building Code (IEBC).
- The Arkansas Fire Prevention Code, which includes the Fire Code, Building Code, and Residential Code, is updated on a three-year cycle. The most recent adopted codes include the 2021 International Building Code (IBC), 2012 International Existing Building Code (IEBC), and 2021 International Residential Code (IRC).
- Other adopted codes include the 2021 International Mechanical Code (IMC), 2018 Arkansas Plumbing Code, and 2018 Arkansas Fuel Gas Code.
2. Primary State Boards or Agencies
- The Arkansas Building Authority, along with other designated agencies, is responsible for adopting state-level building codes.
- The Arkansas State Fire Marshal's office adopts the Arkansas Building Code as part of the Fire Prevention Code.
- The Arkansas Contractors Licensing Board (ACLB) administers the state's contractor licensing regime, establishing entry requirements and compliance obligations for general contractors and commercial specialty contractors. The ACLB also oversees the Residential Committee, which licenses builders of new homes.
- The Arkansas Department of Labor and Licensing also plays a role in building codes.
- Local building departments are responsible for enforcing the state-adopted codes.
3. Classification of Remodels and Demolition Guidelines
- The distinction between cosmetic and structural alterations is generally determined by whether the renovation involves changes to the building's structural integrity. For instance, converting attics or basements into habitable living spaces would typically be considered a structural alteration requiring adherence to specific building codes.
- The International Existing Building Code (IEBC) provides guidelines for alterations, repairs, additions, and existing structures.
- Demolition permits are generally required for the demolition of any building or structure. Local ordinances dictate the specific requirements for demolition permits.
- Demolition permits often require approval from the Arkansas Department of Environmental Quality (ADEQ), particularly concerning asbestos abatement. However, exceptions may apply for certain residential structures.
- Specific criteria can classify a demolition or renovation project as requiring ADEQ approval, such as involvement in commercial or public projects, or if it involves multiple residential buildings within a compact area.
- In some jurisdictions, the removal of two-thirds or more of structural framing members, coupled with modification of the exterior envelope, is classified as complete demolition.
- For projects exceeding a certain cost threshold (e.g., $20,000), a licensed Arkansas contractor may be required to perform the demolition.
Resources to Learn More